HCP 1D is a mono D Class amplifier , with an incredibly minimized size heat sink. All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimised with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.
HCP 1D has been designed to work in multiple configurations. More specifically, it features Hi-Pass pre-amplified outputs, providing the ability to create a Band-Pass on the front woofer. Besides, using the HRC accessory (Hertz Remote Control), the subwoofer volume can be remote controlled with extreme preciseness.
Compact design built from an extruded aluminum heatsink with the top side ensuring effective transfer of the heat generated by the power electronic components.
Special balanced input circuitry to reject electro-magnetic disturbances present on the Pre-In or Speaker-In inputs.
Input featuring both Speaker-In (OEM radio) and RCA-In (Aftermarket radio) inputs.
Selectable ART, Automatic Remote Turn-On/Off function, automatically turns on and off the amplifier when the OEM radio turns on and off (available on Speaker-In only).
Pre-out, also available when using Speaker level inputs, with continuously adjustable (50 to 250 Hz) Hi-Pass filter. Allows to create a Band-Pass filter with the front woofer amplifier to eliminate sub frequencies.
Selectable full range power output, for dual-mono powerful audio systems.
Bass Boost (50 Hz) adjustable to 12 dB, to increase the subwoofer punch.
24 dB continuously adjustable (50 to 250 Hz) Lo-Pass filter.
SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to avoid damages to the subwoofer.
Continuously adjustable PHASE control (0 to 180°); it increases bass alignment of woofer with sub.
Optional Remote Volume Control (HRC); allows the user to adjust subwoofer level from dashboard.
Distorsion - THD (100 Hz @ 4 Ω): 0.2 %
Bandwidth: 10 ÷ 22k Hz
S/N Ratio (A weighted @ 1 V): 100 dB
Damping factor (100 Hz @ 4 Ω): 80
Pre-In sensitivity: 0.6 ÷ 5 VRMS (15 k Ω)
Speaker-In sensitivity: 1.5 ÷ 12 VRMS (47 Ω)
Load impedance (MIN): 2 Ω
Output Power (RMS) @ 14.4 VDC, THD 1%:
1 Ch: 320 W x 1 (4 Ω)
1 Ch: 550 W x 1 (2 Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%:
1 Ch: 380 W x 1 (4 Ω)
1 Ch: 700 W x 1 (2 Ω)
CEA 2006-A Ratings:
(4 Ω, ≤ 1 %THD + N, 14.4 V): 300 W x 1 Ch
S/N Ratio (ref. 1 W output): 80 dBA
Telephone: +44 (0)1249 460 081
Copyright 2015 CustomVanz ® I Raceline Design ® Registered Trade Mark
All Rights Reserved Duplication or distribution of content without prior agreement is strictly forbidden.